Operation Manual For WIFI Intra Oral Camera M888

Operation for Intraoral Camera dental

1 Intra oral camera

（1）Press option 1 the camera will be power on, then press it again, the image will be freezed in the monitor,and then press it, the images will be saved. when press option 1 with more than 2 seconds. The camera will be power off.

（2）Press it to switch the images to full picture or four pcs small pictures or nine piece pictures

（3）Press Previous image button can check the previous image

（4）Press Next image button can check the next image

（5）Press Delete button can delete the images.

（6）Insert the M-99 here.(optional)

From left to right:

 

1 ON/OFF: power switch

 

2 VGA OUT : VGA output

 

3 USB : USB output WIFI output（Two sockets can share）

 

4 VIDEO OUT : Video output

5 : USB output

6 DC-12V : power input

 

 

3 Docking station Remote control

1) Freeze :Freeze button,press one time, the images will be freezed, press again, the images will be saved.

2) Quad：can switch the images to one piece image, four piece images and nine piece images

3) Menu/ok

4) Delete：Delete the single image

5) REC: Video recording

6) Format：delete all the images

7)  : Up

8)   :Down

9)  : Left

10)  :Right

4 Intra oral camera’s operation

A. Let the camera connect with cable

 

 

B. oral cameras and dental docking station connected

 

 

C. Power on the camera and begin to capture images

 

Full image          

                                                                                                                                                                                               

                 

                                                     

Quad image

 

 

Nine images

 

 

D. video operation (video recording only in full image mode )

Use the docking station’s button to make video recording

 

 

When finishes, the interface will be :

 

 

If delete the images or recording files, please press “ Format”

 

 

Use Remote control’s         to choose YES or NO

to decide if need delete all the files

 

And then press MENU/OK, the interface will show:

 

 

Default Selection is “WI-FI transmitter”.please note

WI-FI receiver is an optional device for WI-FI camera

 

If you need instrucion of high speed handpiece, please email us. It's our pleasure to help you!